Graco TI12553a, TI12552a important safety instructions Recipe Setup Screen

Recipe Setup Screen 3

FIG. 52. Recipe Setup Screen 3

This screen appears only if Flush and Fill Input is set to “Recipe” in Option Screen 1, page 36.

First Purge Source

Select “Air,” “Solvent,” or “3rd Flush Valve” (available only if 3rd Flush Valve is set to “On” in Configure Screen 3 on page 33).

Chop Type

Select “Air/Solvent” or “Air/3rd Flush Valve” (available only if 3rd Flush Valve is set to “On” in Configure Screen 3 on page 33). This refers to the process of mix- ing air and solvent (or air and 3rd flush fluid) together during the flush cycle, to help clean the lines and reduce solvent usage.

Final Purge Source

Select “Air,” “Solvent,” or “3rd Flush Valve” (available only if 3rd Flush Valve is set to “On” in Configure Screen 3 on page 33).

Air Chop Time

Enter the air chop time (0.0 to 99.9 seconds).

Solvent Chop Time/3rd Flush Valve Chop Time

Enter the solvent or 3rd flush valve chop time (0.0 to 99.9 seconds).

Setup Mode

Recipe Setup Screen 4

FIG. 53. Recipe Setup Screen 4

This screen appears only if Flush and Fill Input is set to “Recipe” in Option Screen 1, page 36.

If Number of Guns is set to “2” in Configure Screen 4, page 33, a Gun 2 column will appear in this screen.

First Purge Time

Enter the first purge time (0 to 999 seconds).

Total Chop Time

Enter the total chop time (0 to 999 seconds).

Final Purge Time

Enter the final purge time (0 to 999 seconds).

Mixed Material Fill Time

Enter the mixed material fill time (0 to 999 seconds). It refers to the amount of time that is required to load mixed material from the dose valves to the applica- tor/gun.

312779E 45