Technical Data

Technical Data

Maximum fluid working pressure

Base system: 4000 psi (27.58 MPa, 275.8 bar)

 

Low pressure color change: 300 psi (2.07 MPa, 20.6 bar)

 

Coriolis meter: 2300 psi (15.86 MPa, 158.6 bar)

 

RoboMix system: 190 psi (1.31 MPa, 13.1 bar)

 

Flow control: 190 psi (1.31 MPa, 13.1 bar)

Maximum working air pressure

100 psi (0.7 MPa, 7 bar)

Air supply

75 - 100 psi (0.5 - 0.7 MPa, 5.2 - 7 bar)

Air filter inlet size

3/8 npt(f)

Air filtration for air logic and purge air

 

 

(Graco-supplied)

5 micron (minimum) filtration required; clean and dry air

Air filtration for atomizing air (user-supplied)

30 micron (minimum) filtration required; clean and dry air

Mixing ratio range

0.1:1- 50:1*

On-ratio accuracy

up to + 1%, user selectable

Fluids handled

one or two component:

 

• solvent and waterborne paints

 

polyurethanes

 

epoxies

 

acid catalyzed varnishes

 

moisture sensitive isocyanates

Viscosity range of fluid

20- 5000 cps*

Fluid filtration (user-supplied)

100 mesh minimum

Fluid flow rate range*

 

 

G3000, G250 Meter

75 - 3800 cc/min. (0.02-1.00 gal./min.)

G3000HR, G250HR Meter

38 - 1900 cc/min. (0.01-0.50 gal./min.)

Coriolis Meter

20 - 3800 cc/min. (0.005-1.00 gal./min.)

S3000 Solvent Meter (accessory)

38 - 1900 cc/min. (0.01-0.50 gal./min.)

Fluid inlet sizes

 

 

Flow Meter

1/4 npt(f)

Dose Valve/Color Valve Adapters

1/4 npt(f)

Fluid outlet size (static mixer)

1/4 npt(f)

External Power Supply Requirements

85 - 250 Vac, 50/60 Hz, 2 amps maximum draw

 

15 amp maximum circuit breaker required

 

8 to 14 AWG power supply wire gauge

Operating temperature range

41- 122° F (5-50° C)

Environmental Conditions Rating

indoor use, pollution degree (2), installation category II

Noise Level

 

 

Sound pressure level

below 70 dBA

Sound power level

below 85 dBA

Wetted parts

303, 304 SST, Tungsten carbide (with nickel binder),

 

perfluoroelastomer; PTFE

*Dependent on programmed K-factor and application. The maximum allowable flow meter pulse frequency is 425 Hz (pulses/sec). For more detailed information on viscosities, flow rates, or mixing ratios, consult your Graco dis- tributor.

See individual component manuals for additional technical data.

312779E

133

Page 133
Image 133
Graco TI12553a, TI12552a important safety instructions Technical Data

TI12553a, TI12552a specifications

The Graco TI12552A and TI12553A are highly regarded models in the realm of airless paint sprayers, designed to cater to both professional contractors and DIY enthusiasts. These sprayers are engineered for efficiency and versatility, making them ideal for a variety of painting tasks, including interior and exterior applications.

One of the standout features of the Graco TI12552A and TI12553A is their powerful motor, which delivers consistent pressure for a flawless finish. The motor is backed by a robust design, ensuring durability even during extensive use. This enables users to spray unthinned coatings, making the models suitable for a range of materials, including latex, stains, and sealers.

Both models boast Graco's innovative ProConnect technology, allowing for quick and easy pump replacements. This feature significantly reduces downtime and enhances productivity, as users can replace the pump on-site without needing specialized tools. The Graco TI12552A and TI12553A also feature a lightweight and portable design, making them easy to transport around job sites.

The ergonomics of these sprayers are commendable, with comfortable grips and well-placed controls, allowing for extended use without discomfort. Additionally, the integrated storage compartments enable users to keep accessories like sprayer tips and hoses organized and easily accessible.

Another significant characteristic of the TI12552A and TI12553A is their adjustable pressure control. This allows users to tailor the paint flow to suit specific projects, providing greater control over the application and ensuring optimal results. The models also feature a reversible spray tip, which is a convenient addition that allows for easy unclogging, minimizing interruptions during work.

For safety and maintenance, both models come equipped with a built-in suction filter that prevents debris from entering the system and damaging the pump. Regular maintenance is simplified by the easy-access fluid intake, which allows for straightforward cleaning.

In summary, the Graco TI12552A and TI12553A are advanced airless paint sprayers that combine power, convenience, and versatility. With their user-friendly features, ergonomic design, and innovative technologies, these sprayers are essential tools for anyone looking to achieve professional-quality finishes with ease. Whether it’s a residential project or larger-scale commercial job, the TI12552A and TI12553A stand out as reliable choices in the competitive landscape of paint sprayers.