![](/images/new-backgrounds/1150074/15007449x1.webp)
Troubleshooting
Pressure Control Transducer
Removal
Perform Pressure Relief Procedure; page 8. Wait 5 minutes before servicing.
1. Remove four screws (38) and cover (96).
96
38
ti13493a
2.Disconnect transducer connector (E) from motor control board (95).
E
4.Remove four screws (39) and control box (61). Allow control panel (68) to hang down freely.
ti7458a
68
39 | ti13494a |
| |
| 61 |
5.Remove grommet (40) from control box then remove transducer (86) and
ti7260a
40 67
86
ti12999a
95
20ti13495a
3.Disconnect potentiometer connector (C), WatchDog switch, and reed switch connector from motor con- trol board.
6.Remove grommet (40) from transducer and save for reuse.
40
C
ti13722a
ti13495a
3A0157A | 25 |