Graco Inc 1095 Premium Hi-Boy, 695 Premium Hi-Boy, 795 Premium Hi-Boy Grease shaft Install swivel

Hose Reel

Installation

1. Grease shaft. 6. Install swivel.

ti13537a

2. Replace swivel shaft if it was removed.

ti13544a

3.Replace rigid fluid tube to swivel shaft if it was removed.

ti13541a

4.Make sure two washers and wave spring are on hub before hose reel is installed.

ti13545a

5.Install hose reel onto frame. Place C-clamp on reel and frame to allow snap ring to fit into place. Install snap ring.

ti13536a

ti13543a

7. Install E-clip and swivel cap.

ti13538a

8.Install hose to swivel. Make sure to route hose through side arm of hose reel.

ti13539a

9.Turn hose reel clockwise to wrap up hose. Make sure hose is routed through hose guide.

ti13504a

38 3A0157A