Displacement Pump Replacement for 695/795/Mark IV
Displacement Pump Replacement for 695/795/Mark IV
See pump manual 310643 or 310894 for pump repair instructions.
See manual 3A0158 for applicable sprayer part number references.
Removal
1.Flush pump.
2.Perform Relieve Pressure Procedure; page 8.
3.Remove screw (31) and slide pump rod shield (108) forward.
31
ti14894a | 108 |
4.Increase pressure slightly to cycle pump in JOG mode until pump pin (44) is in position to be removed. Turn power switch OFF and unplug power cord. Push up retaining ring (43) and push pump pin out.
44
6.Loosen pump jam nut (56). Unscrew pump.
94 
76 ti7167b
56
43
5.Remove suction tube (76), hose (94) and any wash- ers and
32 | 3A0157A |
