![](/images/new-backgrounds/1283715/2837157x1.webp)
INTRODUCTION
Manual Accuracy | Contact Info | |
|
|
|
|
|
|
We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writing this manual. However, sometimes we still make an occasional mistake.
Also, owing to our policy of continuous improve- ment, your machine may not exactly match the manual. If you find this to be the case, and the dif- ference between the manual and machine leaves you in doubt, check our website for the latest manual update or call technical support for help.
Before calling, find the manufacture date of your machine by looking at the date stamped into the machine ID label (see below). This will help us determine if the manual version you received matches the manufacture date of your machine.
Manufacture Date |
of Your Machine |
For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. Any updates to your model of machine will be reflected in these documents as soon as they are complete.
We stand behind our machines. If you have any questions or need help, use the information below to contact us. Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster.
Grizzly Technical Support 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570)
Email: techsupport@grizzly.com
We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA
Email: manuals@grizzly.com
Machine Description
The Model G0453/G0454 Planer is designed to remove material in precise increments from the surface of natural wood fiber stock to make the workpiece flat.
Once the depth of cut is set, the workpiece is placed on the table and moved into the infeed roller, which pulls the workpiece under the rotat- ing cutterhead where the material is removed. After the workpiece is completely free from the outfeed roller, the depth of cut is increased and the workpiece is passed through the planer again. This process continues until the workpiece is flat and of the correct thickness.
G0453/G0454 (Mfg. Since 3/08) |