![](/images/new-backgrounds/1151138/15113887x1.webp)
To set the 90˚ fence stop:
1.Lower the stop block against the fence, as shown in Figure 59, and loosen the fence tilt lock.
Stop Block
Jam Nut
Positive
Stop Bolt
Figure 59. Adjusting fence to 90˚.
2.Tilt the fence to the 90° position.
3.Using a 90° square, check the fence angle.
—If it is not set at exactly 90°, loosen the jam nut and adjust the positive stop bolt until the fence is exactly 90° as shown in Figure 59.
4.Tighten the jam nut.
To set the 45° outward fence stop:
1.Raise the stop block, loosen the fence tilt lock, and position the fence against the 45° outward positive stop bolt.
Positive Stop
Bolt
Jam
Nut
Figure 60. Adjusting fence 45˚ outward.
2. Adjust the 45˚ outward positive stop bolt until the fence is exactly 45° outward while rest- ing on the bolt (check the angle with a sliding bevel set to 135°).
3. Retighten the jam nut loosened in Step 2.
G0609 12" Parallelogram Jointer |