Additional Safety Instructions for Bandsaws
1.BLADE CONDITION. Do not operate with a dull, cracked, or badly worn blade. Dull blades require more effort to use and are difficult to control. Inspect blades for cracks and missing teeth before each use.
2.HAND PLACEMENT. Never position fin- gers or thumbs in line with the cut. Serious personal injury could occur.
3.GUARDS. Do not operate this bandsaw without the blade guard in place.
4.BLADE REPLACEMENT. When replacing blades, make sure the teeth face toward the front of the saw and the blade is prop- erly tensioned before operating.
5.WORKPIECE HANDLING. Never hold small workpieces with your fingers when cutting. Always support/feed the workpiece with a push stick, table support, vise, or some type of clamping fixture.
6.CUTTING TECHNIQUES. Plan your cuts carefully. DO NOT back the workpiece away from the blade while the saw is run- ning. If you need to back the work out, turn the bandsaw OFF and wait for the blade to come to a complete stop. DO NOT twist or put excessive stress on the blade while backing work away.
7.BLADE SPEED. Allow blade to reach full speed before cutting.
8.LEAVING WORK AREA. Never leave a machine running while unattended. Allow the bandsaw to come to a complete stop before leaving unattended.
9.FEED RATE. Always feed stock evenly and smoothly. DO NOT force or twist blade while cutting, especially when sawing tight curves.
10.MAINTENANCE/SERVICE. Do all inspec- tions, adjustments, and maintenance with the machine turned OFF and disconnected from the power source.
11.BLADE CONTROL. Do not attempt to stop or slow the blade with your hand or a workpiece. Allow the blade to stop on its own.
12.EXPERIENCING DIFFICULTIES. If you experience difficulties performing the intend- ed operation, stop using the machine and contact our Technical Support Department at (570)
Like all machinery there is potential danger when operating this machine. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the pos- sibility of operator injury. If normal safety precautions are overlooked or ignored, seri- ous personal injury may occur.
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results.
G0621 Wood/Metal Bandsaw |
