Grizzly G0664 owner manual Moving & Placing, To move the machine

Moving & Placing

The base of the Model G0664 contains four lift- ing points to allow the machine to be moved into position.

To move the machine:

1.Remove the four lag screws that mount the machine to the pallet at the base of the ship- ping crate.

2.Insert round steel bars through the lifting holes and attach lifting hooks and straps to the bars as shown in Figure 8.

Figure 8. G0664 lifting points.

-16-

The Model G0664 is a heavy machine. Serious personal injury may occur if safe moving methods are not used. To be safe, get assistance and use power equip- ment to move the ship- ping crate and remove the machine from the crate.

3.Lift the machine just high enough to clear the pallet, then move it to its final location. Have an assistant stabilize the machine while mov- ing.

—If you plan to use the leveling feet rather than mounting the machine to the floor, set the machine on blocks at least 4" above the ground before putting it in the final location, then proceed to Leveling Feet on

Page 18.

4.Re-install the coolant reservoir cover/catch tray.

G0664 Heavy Duty Metal-Cutting Bandsaw