Grizzly G0664 owner manual Coolant Catch Tray, To position the blade guide

Coolant Catch Tray Blade Guide Position

Use the coolant catch tray to reduce cutting fluid lost at the end of a workpiece or when cutting at steep angles. The catch tray fits over the lip of the base as illustrated in Figure 27.

8ViX]IgVn

BVX]^cZ7VhZ

Catch Tray

Figure 27. Catch tray installation.

The blade guide supports the blade during opera- tion and the attached blade guard protects the operator from the exposed portion of the blade. Therefore, proper positioning is important for accurate and safe operations.

To position the blade guide:

1.Place the workpiece in the vise and clamp it in position.

2.Lower the saw bow until the blade is just above the workpiece.

3. DISCONNECT BANDSAW FROM POWER!

Upper Blade Guide

Blade Guide Lock Lever

Figure 28. Blade guide and lock lever.

4.Loosen the blade guide lock lever,

5.Slide the blade guide as close to the workpiece as possible, making sure the blade guide will not contact the workpiece during operation.

6.Tighten the blade guide lock lever.

G0664 Heavy Duty Metal-Cutting Bandsaw -27-