INTRODUCTION
Foreword |
| Functional Overview |
|
|
|
|
|
|
We are proud to offer the Model G0664 Heavy Duty Metal Cutting Bandsaw w/Rollers. This machine is part of a growing Grizzly family of fine metalworking machinery. When used according to the guidelines set forth in this manual, you can expect years of
The specifications, drawings, and photographs illustrated in this manual represent the Model G0664 when the manual was prepared. However, owing to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly. For your conve- nience, we always keep current Grizzly manuals available on our website at www.grizzly.com. Any updates to your machine will be reflected in these manuals as soon as they are complete. Visit our site often to check for the latest updates to this manual!
Contact Info
We stand behind our machines. If you have any service questions, parts requests or general ques- tions about the machine, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
If you have any comments regarding this manual, please write to us at the address below:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
A horizontal metal cutting bandsaw is used to make straight cuts in metal workpieces.
The Model G0664 Heavy Duty Metal Cutting Bandsaw with Rollers features a 21⁄2 HP motor, hydraulic upfeed and downfeed, a vise with hydraulic clamping, two blade speeds, variable speed downfeed, cutting angles from
To make cuts, the operator first adjusts the blade to the desired cutting angle, then raises the blade and opens the vise. A workpiece is placed onto the table and the vise is manually closed to within
1⁄4" of the workpiece. The vise close button is pressed to hydraulically clamp the workpiece into the vise. If needed for the operation, the blade coolant pump is started and the blade is turned on. The blade is hydraulically lowered into the workpiece by pressing the blade down button. The feed speed is adjusted with the feed speed knob on the control panel.
When the cut is complete, the blade automati- cally stops and returns to the top of its travel. The workpiece is released from the vise by pressing the vise open button.
Long workpieces can be supported by the infeed and outfeed roller tables.
P.O. Box 2069
Bellingham, WA
Email: manuals@grizzly.com
G0664 Heavy Duty
