Roller Table
Assembly
The Model G0664 comes with two auxiliary roller tables to support long workpieces during opera- tion.
To assemble the roller tables:
1.Insert one lower leg into the upper leg assem- bly, as shown in Figure 12. Tighten one of the cap screws to temporarily hold the leg in place. Repeat for the other seven legs.
Lower Leg |
Upper Leg Assembly |
Figure 12. Lower leg attachment.
2.Thread one foot assembly into one of the lower legs, as shown in Figure 13. Repeat for the other seven feet.
Foot Assembly
Lower Leg
Figure 13. Foot attachment.
G0664 Heavy Duty Metal-Cutting Bandsaw
3.Attach a leg assembly to the under-side of each end of both roller tables with four M8-1.25 x 16 hex bolts, four 8mm flat wash- ers, and four M8-1.25 hex nuts (Figures 14
Leg Assembly
Roller Table
Figure 14. Placing legs on roller table.
Leg Assembly
Roller Table
x4
