Grizzly G0695 owner manual

4.Using a 5mm hex wrench, remove the belt cover by pulling the four cap screws (Figure 66).

Belt Cover

Figure 66. Belt cover removal.

5.Using a 17mm wrench, loosen the lock bolt, use the belt tension lever to de-tension the belt, then remove the belt.

6.Install a new belt.

-42-

7.Push firmly and hold the belt tension lever toward the rear of the machine and re-tighten the lock bolt (Figure 67). No belt deflection is required.

Lock Bolt

& Belt

Tension

Lever

Figure 67. V-belt tension lever.

8.Re-install the belt cover, the belt access plate, and return the headstock to the vertical position.

Model G0695 (Mfg. Since 9/10)