Power Connection
After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply.
To avoid unexpected startups or property dam- age, use the following steps whenever connecting or disconnecting the machine.
NOTICE
The Model G0717 is prewired for 220V. If you plan to operate the machine at 110V, the motors must be rewired (see Page 46) and a 110V plug must be installed.
Connecting Power
1.Turn the machine power switch OFF.
2.Insert the power cord plug into a matching power supply receptacle. The machine is now connected to the power source.
Figure 17. Connecting power.
Disconnecting Power
1.Turn the machine power switch OFF.
2.Grasp the molded plug and pull it completely out of the receptacle. Do not pull by the cord as this may damage the wires inside.
