Grizzly G0756 UnpackingInventory, Needed for Setup, Inventory see Figure Qty, Description Qty

SECTION 3: SETUP

UnpackingInventory

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

SUFFOCATION HAZARD!

Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately.

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory (see Figure 3):		Qty
A.	Drill Chuck B16 3–16mm	1
B.	drill Chuck Arbor MT#4–B16	1
C.	spindle Sleeve MT#4–MT#3	1
D.	spindle Sleeve MT#4–MT#2	1
E.	Bottle for Oil	1
F.	drift Key	1
G.	Chuck Key	1
H.	toolbox (not shown)	1

Needed for Setup

The following are needed to complete the setup process, but are not included with your machine.

Description		Qty
•	Additional People	1
•	Safety Glasses	1 Per Person
•	Cleaner/Degreaser	As Needed

A

G

F

B

C

D

E

•	disposable Shop Rags	As Needed
•	Forklift	1
•	Lifting Straps (Rated 1500 lbs. Minimum)... 1
•	Steel Bar Stock 1" x 3'	1

Figure 3. Toolbox inventory.

NOTICE

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

-12- Model G0756 (Mfg. Since 2/13)