![](/images/new-backgrounds/1311305/31130539x1.webp)
Clean Up
The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this waxy oil with a solvent clean- er or
Gasoline or petroleum products used to clean the machinery could explode causing serious personal injury. DO NOT use gasoline or petrole- um products to clean the machinery.
Smoking near solvents could ignite an explosion or fire causing serious per- sonal injury. Do not smoke while using solvents.
Lack of ventilation while using solvents could cause serious personal health risks, fire, or environmental hazards. Always work in a well ventilated areas to pre- vent the accumulation of dangerous fumes. Supply the work area with a constant supply of fresh air using a fan.
Site Considerations
Floor Load
The Model G1022 Series Table Saws are a heavy load with a medium footprint. Most commercial or home shop floors should be sufficient to carry the weight of the machine. Reinforce the floor if you question its ability to support the weight.
Working Clearance
Working clearances can be thought of as the dis- tances between machines and obstacles that allow safe operation of every machine without lim- itation. Consider existing and anticipated machine needs, size of material to be processed through each machine, and space for auxiliary stands or work tables. Also, consider the relative position of each machine to one another for efficient materi- al handling. Be sure to allow yourself sufficient room to safely run your machines in any foresee- able operation and keep dust collection hoses off the floor and out of the way.
Lighting
Lighting should be bright enough to eliminate shadows and prevent eye strain. Electrical circuits should be dedicated or large enough to handle combined motor amp loads. Be sure to follow local electrical codes for proper installation of new lighting or circuits.
Unsupervised children and visitors entering a shop could receive seri- ous personal injury. Ensure child and visitors safety by keeping all entrances to the shop locked at all times. DO NOT allow unsupervised children or visitors in the shop at any time.
G1022 Series Contractor Saws