SECTION 8: SERVICE ADJUSTMENTS
Blade Parallelism
The Model G1022 Series Table Saws will perform best when the miter slot is parallel to the blade.
Use caution and remain alert when working around the saw blade. Failure to follow this warning could result in serious personal injury or death.
To check and adjust blade parallelism:
1.Disconnect the machine from the power source!!
2.Tilt the blade to 90û. Using an adjustable square, measure the distance (A) between the miter slot and the front of the blade as shown in Figure 59.
! |
Figure 59. 90¡ blade parallelism measurement.
3.Rotate the blade 180° and measure the dis- tance (B) between the miter slot and the back of the blade as shown in Figure 60.
! |
Figure 60. 90¡ blade parallelism measurement.
G1022 Series Table Saws |
