Grizzly Model G1022proz instruction manual Blade, Changing saw blade G1022 Series Table Saws

Blade

To install a saw blade:

1.Disconnect the machine from the power source!!

2.The arbor nut has left-hand threads. Unthread the arbor nut clockwise and remove the outside flange from the arbor. Remove and discard the 3Ú4'' diameter spacer on the arbor shaft.

Use caution and remain alert when working with the saw blade. Failure to follow this warning could result in serious personal injury or death.

3.Install the saw blade onto the arbor. Ensure that the blade teeth point toward you as you stand at the front of the saw.

4.Slide on the flange and thread the arbor nut back on.

5.Use the arbor wrench provided with the saw to tighten the arbor nut. Wedge a block of wood in the teeth of the blade to keep it from turning when tightening the nut as shown in Figure 35.

!

Figure 35. Changing saw blade.

-30- G1022 Series Table Saws