Grundig VISION 7 37-7952 T Changing stored channels for analogue stations, Select channel lists

CHANNEL SETUP

Auto Tuning

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module	Not Inserted
Active Antenna Power	On
	Z Back
Select
	Exit

SPECIAL SETTINGS ------------------------------------------------------------------

Changing stored channels for analogue stations

If channels were stored with the automatic channel search during the tuning of the television channels, you can delete them. You can also store stations in a different preset, change or enter the name of a stations as well as skip channels.

Select channel lists

1 Open the menu with »i«.

– The »PICTURE« menu is displayed.

s	2	Select the »CHANNEL SETUP« menu with »	–	+
s				« or » « and con-

sfirm with »●«.

s	1	3 Select »Programme Table« with »V« or »Λ« and press »●« to
s		confirm.
		Note:
		Additional operations are explained in the following sections.

Deleting channels

1In the »Programme Table« menu, press »V« or »Λ« to select the channel to be deleted and press »3« (yellow) to confirm.

2Press »¥« (green) to confirm the deletion.

Note:

Press »z« (red) to delete all the channels.

Sorting television channels

1In the »Programme Table« menu, select the channel to be moved with with »V«, »Λ«, »–« or »+«.

2Highlight the channel with »¥« (green).

3Select a new channel position by pressing »Λ«, »V«, »–« or »+« and then press »●« to confirm.

– All of the channels that follow move up one position.

Note:

To sort the other television channels repeat steps 1 to 3.

Entering the channel names (maximum of 5 characters)

1In the »Programme Table« menu, select the desired channel with »Λ«, »V«, »–« or »+«.

2Highlight the channel with »z« (red).

3	Select letters or numbers with »Λ« or »V«, move to the next	ENGLISH
	Note:
	position with »–« or »+« and repeat.
4	Store the channel name with »●«.

To enter additional channel names, repeat steps 1 to 4.

47