English
Note: If only one keg is to be dispensed you must still complete all the above steps. Simply leave one keg coupler disconnected in the upright / locked position. Please make sure that the black shut off valves are on the C02 regulator are in the off position.
When stacking 2 kegs be certain to securely install the included keg joining bracket with the supplied hardware.
Make sure the hoses are not damaged by the kegs.
Wing Nut Fixing Screws
Retainer
Screw
Levante Ve
El Barril de la cerveza
CO2 Retainer
El Apoyo del barril
Important Safety Message for Draft Beer Dispensing
When CO2 is used for draft beer dispensing, the system must be adequately protected against excessive pressure
Safety devices are installed in the following places:
A. On or immediately downstream from the CO2 regulator. B. On the keg coupler.
11