English
Unpacking and Accessories Inventory
1.Remove all packing materials. This includes the foam base and all adhesive tape holding the accessories both inside and outside.
2.Inspect and remove any remaining packaging, tape or printed materials before turning on the beer dispenser.
Note: Allow the beer dispenser to stand in an upright position for 2 hours before turning on the power.
Check all supplied accessories in the carton to be sure that all pieces are present and in good condition. A checklist of accessories is listed below for your reference. If you find any accessories that are not in good condition or are missing, please contact our customer service department for assistance.
Our Toll-Free number is 1-877-337-3639.
2 Keg Couplers (Beer Taps), Low Profile Type
1 CO2 Regulator, Single Gauge, Dual Outlet
1 CO2 Cylinder, 5 lbs.
1 Cleaning Kit, Including: 32 Ounce Bottle With Cap
4 Ounce Powder Cleaner Faucet / Line Cleaning Brush
Spanner Wrench (For Installing Beer Faucets to Draft Arm)
1 Draft Arm, 2 Faucet
Type Including:2 Faucets
2 Red CO2 Lines
4 Hose Clamps
2 Black Knobs
1 3” Lower Gasket
1 CO2 Cylinder Ratainer (Bracket, nut and screw)
1Guardrail
1Drip Tray
4Casters
1Wrench
4Large Phillips Head Screws
8Small Phillips Head Screws
2Retainer Fixing Screws
1 Keg Joining Bracket Kit
4
