![](/images/new-backgrounds/1217073/21707325x1.webp)
MAIN REMOTE CONTROL FUNCTIONS
sTransport
JMain Transport Controls: These buttons have no direct function on the DPR 2005 but are used when the remote is programmed for a compatible DVD, CD or tape player. Pressing these buttons
will transmit a stop (Í), record (Î), or pause (±) command, according to the capabilities of the player being controlled. In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the DPR, a TV set, or a cable or satellite
KTrack Skip Up/Down Buttons: These buttons do not have a direct function with the DPR 2005, but when used with a compatibly programmed CD or DVD changer will change the track or chapter currently being played. In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the DPR, a TV set, or a cable or satellite
LPreset Up/Down Button: When the tuner is in use, press this button to scroll through the stations programmed into the DPR 2005’s memory.
wTuning Up/Down Button: Press this button when the tuner is in use to change the station to one with a higher or lower frequency. When the tuner is in the MANUAL/MONO mode, each tap of the Selector will increase or decrease the frequency by one increment. When the tuner receives a strong- enough signal for adequate reception, MANUAL TUNED will appear in the Lower Display Line
& and in the
NDisc Skip Button: This button has no direct function for the DPR 2005 but may be used to change the disc in a CD or DVD changer when the remote is programmed for that type of device.
OProgram Button: This button is used to begin the process of programming the remote. Press and hold this button for three seconds to place the remote in the programming mode. Once the red LED under the Set Button q lights, release the button. You may then select from the desired option. (See pages 41 – 50 for more information on configuring the remote.)
PLight Button: Press this button to activate the remote’s backlight for ease of use in darkened rooms.
QMultiroom Button: Press this button to begin the process of activating the multiroom system or to change the input or volume level for the second zone. (See page 39 for more information on the multiroom system.)
Macro Buttons: Press these buttons to store or recall a “Macro”, which is a preprogrammed sequence of commands stored in the remote. (See page 44 for more information on macros.)
Sleep Button: Press this button to place the unit in the Sleep mode. After the time shown in the display, the DPR 2005 will automatically go into the Standby mode. Each press of the button changes the time until
When the Sleep timer is in use, the
Night Mode Button: Press this button to acti- vate the Night mode. This mode is available in specially encoded Dolby Digital sources, and it preserves dialogue (center channel) intelligibility at low volume levels.
OSD Button: Press this button to activate or turn off the
Tone Control Button: This button controls the tone mode settings, enabling adjustment of the bass and treble boost/cut. You may also use it to take the tone controls out of the signal path completely for “flat” response. The first press of the button displays a TONE IN message in the Lower Display Line
&and in the
Buttons o to enter the desired boost or cut setting. See page 30 for more information on the tone controls.
Mute Button: Press this button to momentarily silence the DPR 2005 or TV set being controlled, depending on which device has been selected.
AM/FM Button: Press this button to select the DPR 2005’s tuner as the listening choice. Pressing this button when the tuner is already in use will select between the AM and FM bands.
Channel Up/Down Selector: These selectors share the disc in the lower portion of the remote with the Volume Up/Down Buttons H. They have no function when the DPR is being controlled, but when programmed for use with a VCR, TV, cable box, satel- lite receiver or other similar product they will change the channel up or down. See pages 41 – 50 for more information on programming the remote.
Transport Play Buttons: These buttons have no direct function on the DPR 2005, but they are used when the remote is programmed for a compatible DVD, CD or tape player. Pressing these buttons will transmit a forward- or
Delay Select Button: This button selects adjustments to the A/V Sync Delay and the individual channel delays. The first press of the button displays an A/V SYNC DELAY message in the Lower Display Line & and in the
an individual output channel, press the ⁄/¤ Navigation Button o until the desired channel name is shown, and then press the Set Button q. Use the ⁄/¤ Navigation Buttons o to change the delay amount. (See page 26 for more information on delay options.)
Speaker Select Button: Press this button
to begin the process of configuring the DPR 2005’s bass management system. Then press the ⁄/¤ Navigation Button o to select the channel you wish to set up. Press the Set Button q and
MAIN REMOTE CONTROL FUNCTIONS 13