![](/images/new-backgrounds/1217073/21707347x1.webp)
SYSTEM CONFIGURATION
DTS-ES Discrete). Press the ‹/› Navigation Button
oto scroll through the choices available for your system and the program in use. The DTS Neo:6 Music mode is available with analog and PCM digital stereo sources and the DTS Neo:6 Cinema mode may be used with matrix
When the 5.1 configuration is in use, the DPR will automatically select the 5.1 version of DTS processing when a DTS data stream is detected. When the 6.1/
7.1mode is selected, the
7.1surround mode. See page 32 for an explanation of the DTS modes.
When an analog or
On the LOGIC 7 menu, the choices available made with the ‹/› Navigation Button o are determined by whether the 5.1- or
With 5.1 configurations, you may select the Logic 7/5.1 Music, Cinema or Enhance modes. They work best with
On the DSP (SURR) menu, the choices made with the ‹/› Navigation Button o select one of the DSP surround modes designed for use with two- channel stereo programs to create a variety of sound field presentations. The Hall and Theater modes are designed for multichannel installations, while the two VMAx modes are optimized for use in delivering a full surround field when only front left and front right speakers are installed. See page 32 for an explanation of the DSP surround modes.
On the STEREO menu, the selection choices made with the ‹/› Navigation Button o on the remote may select a traditional
After the selections are made on the Dolby, DTS, Logic 7, DSP (Surround) or Stereo menus, press the ⁄/¤ Navigation Button o so that the cursor moves to the BACK TO MASTER MENU line and press the Set Button q.
Speaker Setup
This menu tells the DPR 2005 which type of speakers are in use. This is important as it adjusts the settings that decide whether your system will use the
For each of these settings, use the LARGE setting if the speakers for a particular position are traditional
This menu screen also allows you to enter the settings for the DPR 2005’s Quadruple Crossover feature which allows a different crossover point to be used for the front left/right, center, surround and surround back speakers. In systems where
It is easiest to enter the proper settings for the speaker setup through the SPEAKER SETUP menu (Figure 7). If that menu is not already on your screen from the prior adjustments, press the OSD Button
to bring up the MASTER MENU (Figure 1), and then press the ¤ Navigation Button o until
the cursor is on the SPEAKER SETUP line. Press the Set Button q to bring up the SPEAKER SETUP menu (Figure 7).
* S P E A K E R S E T U P *
→ M O D E |
| : | S I Z E | X - O V E R | ||||
L E F T / R I G H T : | S M A L L |
|
|
| ||||
|
|
|
|
| ||||
C E N T E R | : | S M A L L |
|
|
| |||
|
|
|
|
| ||||
S U R R O U N D | : | S M A L L |
|
|
| |||
S U R R | B A C K | : | S M A L L M A I N |
| ||||
|
|
| ||||||
S U B W O O F E R | : | S U B |
|
| ||||
B A S S | M G R | : | G L O B A L |
| ||||
B A C K | T O M A S T E R M E N U |
Figure 7
The first line of the SPEAKER SETUP menu (Figure 7) allows you to switch the menu to change either the underlying speaker size setting or the exact crossover point used for that speaker group. For the first pass through the menu, leave the setting at its default option of SIZE, and then proceed as out- lined below. Once the speaker choices have been set, you may wish to return to this line to change the option so that the crossover settings may be adjusted.
Begin the speaker setup process by making certain that the cursor is pointing at the LEFT/RIGHT line, which sets the configuration for the front left and right speakers. If you wish to make a change to the front speakers’ configuration, press the ‹/› Navigation Button o so that either LARGE or SMALL appears, matching the appropriate description from the definitions shown above.
When SMALL is selected,
When LARGE is selected, a
When you have completed your selection for the front channels, press the ¤ Navigation Button o to move the cursor to CENTER.
Press the ‹/› Navigation Button o on the remote to select the option that best describes your sys- tem, based on the speaker definitions shown below.
When SMALL is selected,
24 SYSTEM CONFIGURATION