![](/images/new-backgrounds/1217073/21707339x1.webp)
SYSTEM CONFIGURATION
3.Carefully remove the protective plastic film from the
4.Install the four supplied AAA batteries in the remote as shown. Be certain to follow the (+) and
5.Turn the DPR 2005 on by pressing the Standby/ On Button 2 on the front panel, or via the remote by pressing the Power On Button b, the AVR Selector e∫ or any of the Input
Selectors 3 ç∂ on the remote. The Standby/On Indicator 1 will turn blue to confirm that the unit is on.
Using the
When making the following adjustments, you may find it easier to use the DPR 2005’s
To view the
IMPORTANT NOTE: When viewing the
The DPR 2005 has two
Making Configuration Adjustments
The full-OSD system is available by pressing the
OSD Button . When this button is pressed, the MASTER MENU (Figure 1) will appear, and adjustments are made from the individual menus.
* * M A S T E R M E N U * *
→ I N / O U T S E T U P
A U D I O S E T U P
S U R R O U N D S E L E C T S P E A K E R S E T U P
D E L A Y A D J U S T
C H A N N E L A D J U S T M U L T I - R O O M
A D V A N C E D
Figure 1
The
To use the full-OSD menu system, press the OSD
Button . When the menu is on the screen, press the ⁄/¤ Navigation Button o until the
➔cursor is next to the item you wish to adjust, and then press the Set Button q to adjust that item. The menus will remain on the screen for 20 seconds, and then they will
FULL OSD TIME OUT.
When the
Setting the System Configuration Memory
The DPR 2005 features an advanced memory system that enables you to establish different configurations for the speaker “size,” component video assignment, digital input, surround mode and crossover frequency for each input source. This flexibility enables you to
source and have the DPR 2005 memorize those set- tings. This means, for example, that you may set differ- ent speaker configurations with the resultant changes to the bass management system. Once these settings are made, they will automatically be recalled whenever you select that input.
The factory default settings for the DPR 2005 have all inputs except for DVD and Video 3 configured for an analog audio input, the Coaxial Digital Audio Input 1
flfor DVD and the Optical Digital Input 1 ‡
is the default for Video 3. The default speaker settings are “Small” at all positions, with the Subwoofer on. The default setting for the surround modes is Logic 7 Music for analog sources. Dolby Digital or DTS will automatically be selected as appropriate when a digital source is in use.
Before using the unit, you may want to change the settings for some inputs so that they are properly configured to reflect the use of digital or analog inputs, the type of speakers installed and the surround mode specifics of your home theater system. Remember that since the DPR 2005 memorizes the settings for each input individually, you will need to make these adjustments for each input used. However, once they are made, further adjustment is only required when system components are changed.
To make this process as quick and as easy as possi- ble, we suggest that you use the
Once you have completed the settings for the first input, many settings may be duplicated for the remain- ing inputs. It is also a good idea to set the configura- tion data in the order these items are listed in the MASTER MENU, as some settings require a specific entry in a prior menu item.
Input Setup
The first step is to configure each input. Once an input is selected, the settings for the Digital Input, Component Video assignment and Surround Mode will “attach” themselves to that input and be stored in a nonvolatile memory. This means that once made, the selection of an input will automatically recall those settings. For that reason, the procedures described below must be repeated for each input source so that you have the opportunity to custom tailor each source to your specific listening requirements. However, once made they need not be changed again unless you need to alter a setting. The configuration settings for speaker “size” may be set once and applied to all inputs, or you may select a different speaker configura- tion for each input using the INDEPENDENT setting, as described on page 26.
20 SYSTEM CONFIGURATION