Harman-Kardon AVR 1600 DTS 2/2/.0 or .1, 3/2/.0 or, Channel music recordings, Logic 7 Game

APPENDIX

Table A9 – continued

Surround Mode	Description	Incoming Bitstream or Signal
DTS Neo:6	Depending on the number of speakers in your system, select 3-, 5- or	• DTS 2/2/.0 or .1, 3/2/.0 or .1
Cinema	6-channel modes, enhanced for movie or video presentations.	• DTS 96/24
		• Analog (2-channel)
		• PCM (32kHz, 44.1kHz or 48kHz)
DTS Neo:6	Available only in 5- and 6-channel modes, creates a surround presentation	• DTS 2/2/.0 or .1, 3/2/.0 or .1
Music	suitable for music recordings.	• DTS 96/24
		• Analog (2-channel)
		• PCM (32kHz, 44.1kHz or 48kHz)
Logic 7	A Harman International proprietary technology, Logic 7 technology enhances	See below
Mode Group	2-channel and matrix-encoded recordings by deriving separate information
	for the surround back channels. This provides more accurate placement of
	sound, improves panning and expands the sound field, even when used
	with 5.1-channel systems. Logic 7 technology uses 96kHz processing, and
	is available in 5.1-or 7.1-channel modes. Three variants are available.
Logic 7	Especially suited to 2-channel sources containing Dolby Surround or matrix	• Analog (2-channel)
Movie	encoding, Logic 7 Movie mode increases center channel intelligibility.	• Tuner
		• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
Logic 7	The AVR 1600 is programmed at the factory to default to this mode for	• Analog (2-channel)
Music	2-channel signals. Logic 7 Music mode is well suited to conventional	• Tuner
	2-channel music recordings.	• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
Logic 7 Game	Use Logic 7 Game mode to enhance enjoyment of video game consoles.	• Analog (2-channel)
		• Tuner
		• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
5-Channel Stereo	Useful for parties, the left- and right-channel information is played	• Analog (2-channel)
	through both the front and surround speakers on each side, while the	• Tuner
	center speaker plays a summed mono mix.	• PCM (32kHz, 44.1kHz or 48kHz, 96kHz, 192kHz)
7-Channel Stereo	Expands the 5-Channel Stereo presentation to include the surround back	• Analog (2-channel)
	channels.	• Tuner
		• PCM (32kHz, 44.1kHz or 48kHz, 96kHz, 192kHz)
2-Channel Stereo	Turns off all surround processing and plays a pure 2-channel signal	• Analog (2-channel; DSP downmix available
	or a downmix of a multichannel signal. The signal is digitized and bass		for multichannel)
	management settings are applied, making it appropriate when a	• Tuner
	subwoofer is used.	• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
2-Channel Stereo	Maintains an analog input signal in that form, bypassing all digital processing	•	Analog (2-channel)
(Analog Bypass)	(i.e., surround and bass management). Requires Tone Control setting to be off.	•	Tuner

44