Harman-Kardon AVR 1600 owner manual Antennas, Usb Port, Connections

CONNECTIONS

If it’s available on your video display, an HDMI connection is recom- mended as the best quality connection, followed by component video, and then composite video.

NOTE: Copy-protected sources are not available at the

Component Video Monitor Outputs.

ANTENNAS

The AVR 1600 uses separate terminals for the included FM and AM antennas.

The FM antenna uses a 75-ohm F-connector. See Figure 12.

Figure 12 – FM Antenna

The AM loop antenna needs to be assembled. Connect the two leads to the spring terminals on the receiver. The AM antenna leads have no polarity, and you may connect them to either terminal. See Figure 13.

Figure 13 – AM Antenna

USB PORT

The USB Port on the AVR 1600 is used only for software upgrades. If an upgrade for the receiver’s operating system is released in the future, it may be downloaded to the AVR using this port. Complete instructions will be provided at that time.

17