3 General
17 - 20, 22:Refer to section "Handheld Transmitter".
25 Antenna: Permanently connected, flexible antenna.
26 Audio input: 3-pin mini XLR connector with both mic and line level pins that automat-
ically match the connector pinout of the recommended AKG microphones (optional) or
supplied MKG L instrument cable.
You can connect AKG microphones with a mini LXLR connector to the audio input on the
bodypack transmitter:
The MKG L instrument cable lets you connect an electric guitar, electric bass, or remote
keyboard to the bodypack transmitter.
For further details, refer to the respective AKG brochures.
27 Frequency sticker: Sticker attached to the transmitter shaft, indicating the available
carrier frequency range and approval data.
28 Battery compartment for the supplied AA size 1.5 V dry battery o r a commer cial
1.2 V, ≥2100 mAh NiMH AA size rech argeable battery. The viewing wind ow lets you
check if there is a dry or rechargeable battery inside the battery compartment. You can
also insert a white lettering strip (supplied) or a color code strip (optional) into the view-
ing window.
29 Belt clip for fixing the transmitter to your belt.
30 MUTE jack: This jack allows you to connect either the optional Remote Mute switch or
the supplied terminal connector for locking the ON-MUTE/PRG-OFF switch to prevent op-
erating errors.
31 Gain control:This rotary control inside the battery compartment allows you to match the
bodypack transmitter input gain to the microphone or instrument you connected to the
transmitter.
Bodypack TransmitterRefer to fig. 4 on page iv.
31
WMS 470
WMS470_F031016_Hex_final 22.12.2010 14:19 Uhr Seite 31 (Schwarz/Black Auszug)