Harman-Kardon WMS 470 manual Advanced Functions Extra Menu, Receiver ID, Messages

6 Advanced Functions (EXTRA Menu)

The EXTRA menu provides the following functions:
NAME	receiver ID
STATUS	status and warning messages
RHSL	rehearsal function for finding dropouts
SQL	squelch threshold
PILOT	ilot tone
RESET	default settings
INFO	system information screens
EXIT	quit submenu

The "NAME" screen lets you edit the existing name of the receiver. If you have not stored a	Receiver ID
receiver name yet, you can use the "NAME" screen to assign a new name to your receiver.
The receiver name may be any combination of up to six letters and/or numbers.
1. Select the “NAME” menu.
The first character start flashing.
2. Use the arrow keys to select the desired characters.
The "STATUS" screen lets you activate a visual warning that alerts you to selectable critical	Status and Warning
system conditions. If one of the selected conditions occurs, the display backlighting will	Messages
change from green to red and a warning message will appear on the display that describes
the current condition. The warning messages appear in order of priority:

1."LOW.BAT":Transmitter battery capacity is low. The battery will be dead in about 60 min- utes.

2."AF CLIP": Audio overload. The received audio signal drives the receiver into clipping.

3."RF.LOW": Received signal field strength is so low that the receiver audio output has been muted to suppress unwanted noise.

All selected warning functions are active in both LOCK and SETUP modes.

The REHEARSAL function detects a maximum of six dropouts and records the time each	REHEARSAL -
dropout occurred, the minimum field strength at each antenna, and the maximum audio	Soundcheck
level. You can view the list of results after the recording has stopped.

1.From the "RHSL" screen on the receiver, select "START" to start the recording.

2.Move the transmitter around the area where you will use the system to check the area for "dead spots", i.e., places where the field strength seems to drop and reception de- teriorates.

3.Speak or sing into the microphone or play a few bars on your instrument (the louder the better).

4.You can stop the recording at any time by pressing ￿ briefly.

Possible indications:

“D1”: The recording has been completed, the display indicates dropout no. 1.

“MIN RF”: The recording has been completed, no dropout has been detected. The display indicates the minimum RF level measured.

“OVFL”:The recording has been stopped automatically because six dropouts have been de- tected already or because the available time (16 minutes) has elapsed.

WMS 470 39