ξCamera Name: This field is used to enter a descriptive name for the device. The default setting for the Camera Name is
ξLocation: This field is used to enter a descriptive name for the camera’s location.
ξAdmin: The fields in this section are used to enter the administrator’s name (“Admin ID”) and password. The administrator’s ID and password will allow the user to access and configure the System Administration settings. Be sure to enter the password twice to confirm the details, once in the Admin Password field and again in the Confirm Password field.
The default settings for both the administrator user name and password are blank (or null string). The administrator name (“Admin ID”) has a maximum length of 12 (printable ASCII) characters and the administrator password has a maximum length of 8 (printable ASCII) characters.
It is highly recommended that you set the Admin ID and Admin Password as soon as possible to enable security options for the camera.
NOTE: If you would like to create a user account that only has access to the video image, but not the system administration settings, you can do this in the “User” page of the Configuration section. Instructions on how to create such a user are provided in the pages that follow.
ξLED Control: This option allows users to set up the LEDs, as desired. This feature provides flexibility when surveillance activity is ON.
There are three options, and they are as follows:
| Power - Steady On | |
Normal | Link - Steady On | |
Note: When there is LAN activity, the LED | ||
| ||
| indicator will flash steadily. | |
OFF | Power - LED indicator is off. | |
Link – LED indicator is off. | ||
| ||
Dummy | Power - Steady On | |
Link - Steady On, with random flashing. | ||
|
The default setting for the LED control is Normal. When you have configured the LED controls, the correct illumination will set after 1 minute.
43
