Healthrider WESY8630C3 manual Direction shown, Place, Upper

CABLE ASSEMBLY

32. Route the Press Cable (88) over the indicated			32
3 1/2” Pulley (82) attached to the Pulley					31
Plates (31).	The Cable must be routed from				50
the direction shown.		Refer to the inset draw-
				88	82
ing. Be sure that the Cable is between the
Cable Trap (80) and the Pulley, and that the
Cable Trap is positioned to hold the Cable
in place.
Tighten the 3/8” x 2” Bolt (50) and the 3/8”						80
						88
Nylon Locknut (not shown).
33. Route the Press Cable (88) around a 3 1/2”			33
Pulley (82). Attach the Pulley and a Cable
Trap (80) to the Leg Press Upright (4) with a
3/8” x 3 3/4” Bolt (76), a 3/8” Washer (38) and
a 3/8” Nylon Jam Nut (43).		Be sure that the			4
Cable Trap is turned to hold the Cable in
place.					38	43
				88
				82
			76	80
34. Route the Press Cable (88) over the indicated			34
3 1/2” Pulley (82) attached to the Press
Frame (12). Tighten the 3/8” x 3 1/2” Bolt (66)
and the 3/8” Nylon Locknut (not shown).
					82
			88
					66
					12
35. Wrap the Press Cable (88) around a “V”			35
Pulley (81). Attach the “V” Pulley to the
			upper		97
bracket on the Leg Press Upright (4) with a
3/8” x 2 1/4” Bolt (97) and a 3/8” Nylon Jam						81
Nut (43).
					4
						88
			43

15