R
CB 1200 Pellet Stove
B. Top Vent Adapter Installation
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
Installing the Top Vent Adapter
1.Put a layer of high temperature silicone on the 3 inch (76mm) exhaust outlet.
2.Slide the top vent adapter onto the rear exhaust outlet and adjust the assembly to a vertical position.
3.Drill 4 holes with #26 drill bit (provided) into the back of the appliance using the outer shield as a pattern (make sure the assembly is vertical). Figure 18.1
4.Install the 4 mounting screws.
5.Install the vent pipe into the top vent adapter (be sure to silicone all joints).
6To clean the top vent adapter, open the
See Figure 18.1
C.Rear Vent and Rear Vent to Top Vent Adapter Installation
Figure 18.2 - Rear Vent Adapter
3" - 6" Offset 
Adapter 
3" - 3"
Top Vent Adapter
Drill holes in back of 
stove an
d secure with 4 screws, 2 on
each side.
Clean Out
Cover
Figure 18.3 - Rear to Top Vent Adapter - 90o
1.Put a layer of high temperature silicone on the 3 inch (76mm) exhaust outlet.
2.Slide the adapter onto the rear exhaust outlet and adjust the assembly to the appropriate position.
3.Install the vent pipe into the adapter (be sure to silicone all joints)
Figure 18.1
Page 18 | September 1, 2008 |
