•Place outer collar on rear of appliance and replace four screws to hold collar in place. See Figure 9.11. Make sure insulation is attached to the collar base!
Figure 9.11 Place Outer Collar on Rear of Appliance
•Locate the cover plate removed in the second step. Place plate around rear vented collars and replace four screws to hold plate in place. See Figure 9.12.
Figure 9.12 Cover Plate Placed on Rear of Appliance
•Place the white insulation with the slot around the outer collar. See Figure 9.13.
Figure 9.13 Place Insulation over the Cover Plate
•Place inner cover plate on appliance top and replace four screws to hold inner cover plate in place. See Figure 9.14. Make sure gasket is replaced with the cover plate!
Figure 9.14 Inner Cover-Top
•Place outer cover plate on appliance top and replace four screws to hold outer cover plate in place. See Figure 9.15. Make sure insulation is replaced with cover plate!
Figure 9.15 Outer Cover-Top
Heatilator • Caliber CNXT Series • | 39 |
