PLEASE READ THIS MANUAL BEFORE INSTALLING AND
USING THIS APPLIANCE.
MODEL
IS AUSTRALIAN GAS ASSOCIATION APPROVED FOR NATURAL GAS OR PROPANE AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas consump- tions and pressures.
Installation of this appliance should only be carried out by an authorized person in accordance with the manufacturers instructions. All relevant codes and regulations laid down by the gas fitting authorities, municipal building regulations, electrical wiring regu- lations, and the requirements of the AGA Gas In- stallation Code must be observed.
This appliance and its components are tested and safe when installed in accordance with this Installa- tion Manual. Report to your dealer any parts dam- aged in shipment, specifically check glass condi- tion. The gas logs and flue system components are in separate packages. Read all instructions before
starting installation and follow these instructions carefully during installation to ensure maximum ben- efit and safety. Failure to follow them will void your warranty and may present a fire hazard.
The Heat & Glo warranty will be voided by, and Heat
&Glo disclaims any responsibility for the following actions:
•Installation of any damaged heater or flue sys- tem component
•Modification of the heater or balanced flue sys- tem installation other than as instructed by Heat & Glo.
•Improper positioning of the gas logs or the glass door
•Installation and/or use of any component part not manufactured or approved by Heat & Glo, not withstanding any independent testing labo- ratory or other party approval of such compo- nent part or accessory.
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these installation instructions may result in a possible fire hazard and will void the warranty. Save this manual for future reference.
Heat & Glo, a brand of Hearth & Home Technologies, Inc. | Heat & Glo Quality Systems | |
20802 Kensington Blvd., Lakeville, MN 55044, USA | ||
registered by SGS ICS | ||
Copyright 2006 • Printed in U.S.A. | ||
|
2 | Heat & Glo • |
