Hearth and Home Technologies 6000TRSI-AUC, Heat & Glo specs

3

3

LOG #3 (SRV385-721):Rest log #3 in the grove on log #1 with its lower portion resting against the left side wall.

4

4

LOG #4 (SRV385-722):Place log #4 on 5th grate bar and rest its top into the groove on log #1.

5

5

LOG #5 (SRV385-723):Position log #5 between the 3rd and 4th grate bar resting on the grooves in log #1 and log #2.

Heat & Glo • 6000TRSI-AUC • 2078-900 Rev. G • 12/06

23

Image 23

Hearth and Home Technologies manual Heat & Glo 6000TRSI-AUC 2078-900 Rev. G 12/06

Contents

Model 6000TRSI-AUC Installation and Operation Instructions Heat & Glo Quality Systems Table of Contents 476 686 31-5/8 803 174 126.9 Installation Instructions Clearance Requirements Rear FlueTop Flue Framing the Heater Clearances n mm 10.97m Flue System Approvals and Installations Elbows 13.1 331mm 24 610mm Flueing with One 90 Elbow +H 1 FT + H 1 FT 13 Flueing with three 90 elbows + H 1 FT Flueing with Three 3 90 Elbows Flueing Out the Top Flue Flueing Out the Rear Flue Assembling Flue Components Install Support Brackets Flue Termination Must be Positioned SO That the Arrow is Pointing UP Connecting the GAS Supply Shock Risk Ignition System Wiring Blower Fan Clearance to a mantelpiece is 12 inches 305mm. See Figure Mantel Clearances Tabs LOG Placement Instructions Heat & Glo 6000TRSI-AUC 2078-900 Rev. G 12/06 Operating Instructions Installer Testing Operating Cautions Safety & Lighting Information For Your Safety Read Before Lighting Instructions FAN Operation Power Outage Servicing and Maintenance Removal of Covers for Servicing Removal of Components for ServiceParts Replacement Adjustments and Replacement Parts Inspect Maintenance Tasks Maintenance Tasks Electronic Ignition System Troubleshooting Adjust the air shutter at the base of the burner 6000TRSI-AUC Log set assembly GLA-6TRXI 6000TRSI-AUC Heat & GLO, a brand of Hearth & Home Technologies Inc Limited 10 Year Warranty Melbourne