Hearth and Home Technologies 6000TRSI-AUC, Heat & Glo manual Mantel Clearances

F. MANTEL CLEARANCES

Clearance to a mantelpiece is 12 inches (305mm). See Figure 1.32.

						305
					279
					254
				229
NON-COMBUSTIBLE				203			279
BOARD			178
							254
			152
							229
	127					203
	102
						178
51	76					152
					114	127
25	76		89	102
38
		TOP FRONT EDGE
			OF FIREPLACE
NOTE: ALL DIMENSIONS ARE
SHOWN IN MILLIMETERS.

FINISH WALL MATERIAL MAY BE

COMBUSTIBLE - TOP AND SIDES

NON-COMBUSTIBLE
BOARD	0

0 0

HIGH TEMPERATURE (1500C MIN.)

TOP AND SIDE SEAL JOINT

FIGURE 1.32 FIGURE 1.33

IF JOINTS BETWEEN THE FINISHED WALLS AND

THE FIREPLACE SURROUND (TOP AND SIDES)

ARE SEALED, A 150° C. MINIMUM SEALANT

MATERIAL MUST BE USED. THESE JOINTS ARE

NOT REQUIRED TO BE SEALED. ONLY NON-

COMBUSTIBLE MATERIAL (USING 150° C.

MINIMUM ADHESIVE, IF NEEDED) CAN BE

APPLIED AS FACING TO THE FIREPLACE

SURROUND. SEE FIGURE 1.33.

Heat & Glo • 6000TRSI-AUC • 2078-900 Rev. G • 12/06 21