Heat & Glo LifeStyle 6000C manual D. Burner Identification/Verification, Notch Location

Figure 3.5 Valve Assembly Removal

D. Burner Identification/Verification

The burner may be accessed for identification and verification purposes. This task should be performed by a qualified ser- vice technician. The base refractory, valve plate and grate do not need to be removed to access the burner assembly. The logs and fiber burner top need to be removed to access the burner. Disconnect the pilot from the burner before removal. See Figure 3.6 for burner identification chart. Notch patterns are located on bottom side of burner.

		NOTCH LOCATION
	NG	LP
	6000C
	6000CL
	6000CLX
	6000CBV
	8000C
	8000CL
	8000CLX
	8000CBV
Figure 3.6	Burner Identification
	Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. T • 9/12		19