
Placing the Ember Material
Two bags of ember material are shipped with this gas fireplace. Use only a portion of each bag for the best appearance and operation.
To place the ember material:
•Remove latches and tension springs around the glass door.
•Remove the glass door from the unit (Figure 33).
LATCHES |
(BOTH BOTTOM |
AND TOP) |
GLASS |
ASSEMBLY |
Figure 33. Glass Assembly
•Place small pieces of ember material on burner top (Figure 34). Do NOT press embers into burner ports. Cover the top of the burner with a single layer of ember material. Do NOT place embers on the ports as noted in Figure 34.
Figure 34. Placement of the Ember Material
•Save the remaining ember materials for use during fireplace servicing.
•Replace the glass door and a front trim door on the unit (see Replacement Parts Section of the manual.)
•Replace the latches and tension springs.
36 | Heat & Glo • |