Heat Controller B-MMC09FA-1, B-MMH12FA-1, B-MMC12FA-1 Installing Installation PlateStandard Type

Installation

Installing Installation Plate(Standard Type)

The wall you select should be strong and solid enough to prevent vibration

1.Mount the installation plate on the wall with

type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.

•Mount the installation plate horizontally by aligning the centerline using a level.

2.Measure the wall and mark the centerline. It is also important to use caution regarding the location of the installation plate, as routing the wiring through the wall is typically done in this application. Drilling the hole through the wall for piping connections must be done safely.

CHASSIS		Distance (mm)
	A	B	C	D
9 kBtu/h	50(1.97)	105(4.13)	59(2.32)	105(4.13)
12 kBtu/h	65(2.56)	110(4.33)	85(3.35)	110(4.33)

Installation Plate

Chassis

Hook

Type "A" screw

D		Installation plate	B
Ø70mm	C		A	Ø70mm
	Left rear piping		Right rear piping

Drilling the hole in the wall

•Drill the piping hole with a Ø 70 mm (Ø 2.75 inch) hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the outdoor side.

Indoor

WALL

Outdoor

5-7 mm (0.2"~0.3")

Wall Mounted Multi-Zone Split System Air Conditioner - 22 -