Henny Penny
2-12. FILTER HEATER
SWITCH
Checkout
Replacement:
Model
The Filter Heater Switch is a rocker type switch. With the switch in the "ON" position, the filter heater will operate, melting any solidified shortening in the filter lines.
1. Remove electrical power supplied to unit.
Remove electrical power supplied to the fryer by unplug- ging the unit, or turning off the wall circuit breaker, or electrical shock could result.
2.Remove Control Panel, but leave hinged on unit.
3.Remove and label wires from the switch and check across from top to bottom for continuity. With the switch in the "ON" position, the circuit should be closed. If the switch is defective, replace it by following the next step.
4.Push in on tabs on the ends of the switch and pull switch from the front of the control panel.
5.Replace new switch, replace wires, and install controlpanel.
593 |
