Henny Penny |
| Model |
5. | Close door and turn power switch on. Unit is now ready for | |
MAINTENANCE |
| operation. |
(Continued) | If the fan needs a more thorough cleaning, or | |
| ||
| cleaning the fan guard, follow the following steps. | |
| 1. | With power on, open door to drain pan and look up at fan to |
|
| make sure fan is operating. |
| 2. | If fan is not operating, it needs replaced; if fan is operating |
|
| continue onto step 3. |
| 3. | Remove electrical power supplied to the unit. |
|
| Place the power switch to the OFF position. Disconnect the |
|
| power cord from the wall, or turn off wall circuit breaker or |
|
| fuse, or electrical shock could result. |
| 4. | Remove the screws securing decorative strips on both sides |
|
| of the control, and remove decorative strips. |
| 5. | Swing panel out to the left and locate fan on the left behind |
|
| panel. |
| 6. | Thoroughly clean fan, plus check fan guard per above in- |
|
| structions. |
| 7. | Replace panel and decorative panels. |
| 8. | Restore power to unit and unit is now ready for operation. |
294 |