Model OFE- 290
4. Allow fryer to heat until digital display shows “DROP”. | |
(Continued) | (Press the EXIT COOL button if the display shows COOL”) |
The heat cycles on and off approximately 10 degrees before the setpoint temperature, to help prevent overshooting the setpoint temperature. (proportional control)
5.Slide racks of breaded product into carrier on the lid, starting with the bottom rack, to prevent damaged product.
Before loading product onto the racks, lower the racks into the hot shortening to prevent the product sticking to the racks.
6.Lower and latch the lid down and press the appropriate product button.
7.At the end of the cycle, an alarm sounds, and the display shows “DONE”. At this time, press the appropriate product button.
8.Unlatch and raise the lid cautiously.
9.Using the rack handles, remove the racks of product from the carrier, starting with the top rack to prevent damaged product.
703 |
