Manuals / Hitachi / Computer Equipment / Server

Hitachi 8880R manual Ch 1 Hardware, 6 SCA2 Disk Bay SAF-TE Hot-swappable disk bay compliant SCSI

Models: 8880R

1 62

Page 6

• 6 SCA2 Disk Bay SAF-TE (Hot-swappable disk bay) compliant SCSI

Ch 1: Hardware

	CPU	PentiumII Xeon
		400/450 MHz x 8 1/2MB L2 Cache

Bay		• 6 SCA2 Disk Bay SAF-TE (Hot-swappable disk bay) compliant SCSI
		backplane
		• 5.25-inch bay x 3

High Availability		Redundant cooling fan
		Redundant power supply

Hot Swap HDDs		SVP Hardware

Power Supply		3 + 1 Redundant power supply, 550W for each P/S unit

Size		430 (W) x 640 (D) x 756 (H) mm, 17 U ~ Approx. 17" x 25" x 30"

Weight		Between 70–100 kg ~ Approx. 175–250 lbs.*

*WARNING: Do NOT attempt to lift or move the server by yourself as physical injury may occur.

2	Hitachi VisionBase 8880R Server

Page 6

Image 6

Hitachi 8880R manual Ch 1 Hardware, 6 SCA2 Disk Bay SAF-TE Hot-swappable disk bay compliant SCSI

Contents

Hitachi VisionBase 8880R Server Product GuideDisclaimer CopyrightTrademarks Issue Date November Part Number 202-85031-01-Rev AContents 3 Error Information POST Error System Beeps System Specifications 1 HardwareSystem Overview Ch 1 Hardware 6 SCA2 Disk Bay SAF-TE Hot-swappable disk bay compliant SCSICh 1 Hardware Hitachi VisionBase 8880R ServerPowering-On the System Figure 1 Accessing the Power SuppliesFigure 2 Accessing the Power Supplies Figure 3 P/S Receptacle and On/Off Switch Front PanelFigure 4 Front Panel Detail Figure 5 Back Panel Detail Figure 6 Direct Boot Switch DetailBack Panel Detail AWarnings and Cautions Removing the Server Panels and Accessing Its ComponentsSafety Guidelines Tools and Supplies You NeedAccessing the PCI Slots Figure 7 Accessing the Option SlotsPCI/ISA Option Boards Figure 8 Option SlotsSCSI SCA Hard Disk Drives Figure 9 Accessing the Hard Disk DrivesHard Disk Drives Figure 10 Hard Disk Drive BaysInstalling/Swapping a HDD Figure 11 Removing/Installing a HDDHDD HDD Position Pins HDD Carrier 4 Mounting Screws Optional DevicesFigure 12 Mounting the HDD Carrier Ch 1 HardwareFigure 14 CPU/VRM Installation Detail Figure 13 Memory and CPU SlotsMemory Figure 15 Memory Board Slot Location The system supports the following specifications for memory DIMMsCh 1 Hardware Jumper SettingsFigure 16 System Board Default Jumper Settings Hitachi VisionBase 8880R ServerFigure 17 I/O Board Switch Settings Ch 1 Hardware2 System Environment Setting Flow of System Environment SettingBefore Operations What You Can Do with the System Environment Setting Outline of the Setup MenuNotes on Use Outline of ISA Configuration Utility ICUSetting for Each Board PCI BoardSetup Menu Flow of the Setup Menu OperationStarting the Setup Menu Figure 18 Entering Setup MenuSetup Menu Screen Configuration of the Setup Menu ScreenFigure 19 Setup Menu Screen Configuration Operating the Keys on the Setup Menu In the Setup Menu, the following key operations are allowedSteps for Setting the Setup Menu What You Can Do on the Main MenuFigure 20 Main Menu Screen System Time and System Date Legacy Diskette A,BPrimary Master Slave What You Can Do on the Advanced Menu Reset Configuration DataExecute ROM Diagnostic Unsupported Network serverSelect Resources PCI ConfigurationI/O Device Configuration Current ResourcesLocal Bus IDE adapter Parallel portFloppy disk controller PS/2 MouseConsole Redirection Unsupported Ext MP Configuration TableEnable memory gap I/O APIC ModeSpeaker Volume WinNT 4.0 Install ModeLarge Disk Access Mode Unsupported Caching Above 4GBSet Supervisor Password Supervisor Password isUser Password is Set User PasswordWhat You Can Do on the Boot menu Figure 23 Boot Menu ScreenHard Drive IDE Hard Disk Drive Exit Discarding Changes What You Can Do on the Exit MenuExit Saving Changes Figure 24 Exit Menu ScreenLoad Setup Defaults ISA Configuration Utility ICUNotes on the Setup Menu Discard ChangesBackup for ICU Disk Flow of Operation with the ICUSpace System ResourcesStarting the ICU Starting the ICUOperating the ICU How to Use HelpICU Screen Figure 25 ICU ScreenExiting the ICU Checking Resource Status Checking Resources Used by the SystemAdding an Extended Board Checking Resources for Extended Boards6. A dialog box for confirmation is displayed. Choose OK Changing the Settings in Extended Boards Settings for Each ResourceReserving I/O Port Addresses Removing an Extended Board When ICU Program Disk Has Been Destroyed Reserving Resources In Use from an ISA BoardNOTE Unknown Card is displayed for RAID controller PC-CA7112 Restoring Configuration Information Lock/Unlock CardErrors and Countermeasures Restrictions on the ICU Returning the ICU Settings to Defaults Returning the Settings to DefaultsReturning the Settings of the Setup Information to Defaults List of Utility SettingsFixed Configuration Ch 2 System Environment SettingHitachi VisionBase 8880R Server Symbios Logic SCSI Configuration Utilities This table defines the SCSI Select factory default settingsCh 2 System Environment Setting Ch 3 Error Information 3 Error InformationPOST Error Hitachi VisionBase 8880RSystem Beeps 4 NT Drivers and Limitations Installing Windows NT2. Select Advanced Menu-Windows NT 4.0 Install Mode Windows NT Driver RecommendationsCh 4 NT Drivers and Limitations Hitachi VisionBase 8880R5 Related Document and Specification Environment SpecificationRelated Document Ch 5 Related Document and Specification Hitachi VisionBase 8880R

• 6 SCA2 Disk Bay SAF-TE (Hot-swappable disk bay) compliant SCSI