ADJUSTMENT AND OPERATIONAL PRECAUTIONS
1. Confirmation of saw blade lower limit position
The lower limit of the saw blade cutting depth is
When changing the position of the 8 mm depth adjustment bolt that serves as the lower limit position stopper of the saw blade, perform the following steps.
(1)Make the tip of the 8 mm depth adjustment bolt contact with the hinge.
(2)Turn the 8 mm depth adjustment bolt with a
CAUTION: Perform the adjustment carefully to ensure that the saw blade does not cut into the turn table.
Fig.
Fig.
8 mm depth adjustment bolt
Turn table
Fig.
8 mm depth adjustment bolt
2. Confirmation for use of sub fence (Optional accessory)
The sub fence is optionally available (located at the front right of the base). Use the sub fence for miter cutting and right bevel cutting. The sub fence supports the workpiece widely for stable cutting. In the case of left bevel cutting, raise the sub fence as illustrated in Fig. 17 and turn it counterclockwise.
*For the U.S.A. and Canada, the Models C 8FSHE and C8FSE are equipped with the sub fence as a standard accessory.
Fig. 17
Sub fence
NOTE: Mount the sub fence as follows.
Insert the
WARNING: In the case of left bevel cutting, turn the sub fence counterclockwise. Otherwise the main body or the saw blade may contact the sub fence resulting in an injury. Be sure to instruct the customers to turn the sub fence counterclockwise in the case of left bevel cutting.
