Hitachi CP-X268AWF user manual Network Settings, Ssid

2. Equipment connection and network setting

Network Settings (Continued)

Item

Description

Wireless LAN		&RQ¿JXUHVZLUHOHVVVHWWLQJV
	Mode	Select "AD-HOC" or "Infrastructure".
		Select using channel between "1" and "11".
	CH	NOTE • Depending on the country where you are
		the channels may vary. In addition, depending on the
	(Communication	country or region where you are may be required to use
	channel)
		DZLUHOHVV/$1FDUGWKDWFRQ¿UPWRWKHVWDQGDUGVLQWKH
		respective country or region.
	Speed	Select communication speed.
	(Communication speed)
	Encryption	Select data encryption method.
		,QSXW:(3NH\ZKLFKKDVVDPHOHQJWKGH¿QHGE\:(3
	WEP Key	When "64bit" or "128bit" is selected, input 10 characters or
		26 characters respectively. Only numbers from "0" to "9" and
		alphabets from "a" to "f" can be used.
		Input WPA Passphrase. Available number of input characters
	WPA Passphrase	is 8 to 63. Only alphabets, numbers and following symbols
		can be used.
		 >–@ABC^_`a
		Set SSID. Maximum number of input characters is 32. Only
	SSID	alphabets, numbers and following symbols can be used.
		 >–@ABC^_`a

Click the [Apply] button to save the settings.

NOTE ‡7KHQHZFRQ¿JXUDWLRQVHWWLQJVDUHDFWLYDWHGDIWHUUHVWDUWLQJWKH QHWZRUNFRQQHFWLRQ:KHQWKHFRQ¿JXUDWLRQVHWWLQJVDUHFKDQJHG\RXPXVW restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

24