2.Equipment connection and network setting

2.2Network connection using “One-Click-Communication” function (Continued)

 &OLFN³2QH&OLFN´EXWWRQLQ¿JD3URMHFWRULVIRXQG7KHQFDSWXUHVWDUW button is pushed and real time display is started automatically.

[Wireless LAN connection]

1)When projector network settings such as IP address and subnet mask are changed, need to return to the projector factory default settings. (9)

2)In case 802.11b/g wireless LAN device is built-in the PC, make the LAN valid and other network connections invalid. If wireless LAN device is not built-in the PC. in PC, connect 802.11b/g wireless LAN device and install device driver to the PC. (Refer to the user guide for wireless LAN device details.)

 6WDUWXS³0,8/LYH9LHZHU´WKHQWKHZLQGRZDSSHDUV VKRZQLQ¿JD 

 &OLFN³2QH&OLFN´EXWWRQDVVKRZQLQ¿JD7KHQSURMHFWRUZLOOEHIRXQG and the capture start button is activated then real time display is started automatically.

2.3 Manual network connection setting – Wired LAN -

When you need to set the original IP address and SSID other than factory default settings, need to set up network connection manually.

This section explains how to set up network connection manually.

2.3.1. Equipments connection

$W¿UVWFRQQHFWLQJSURMHFWRUDQG3&ZLWKZLUHG/$1FRQQHFWLRQWRFKHFN3& setting and connection. Next section explains PC settings.

Connecting projector with network using LAN cable, and then set it ready to communicate with PC.

* Connecting with existing network, contact network administrator.

At last, turn on the projector. This is the end of Equipments connection.

10

Page 89
Image 89
Hitachi CP-X268AWF user manual Manual network connection setting Wired LAN, Wireless LAN connection, Equipments connection