Hitachi CP-X268AWF user manual Problem Likely Cause Things to Check

5.Troubleshooting

5.Troubleshooting

	Problem		Likely Cause	Things to Check	Reference
					Page
					Number
			The projector is not turned	Is the projector's lamp on?	*19
			on.
No image
			The projector's input source	Is the projector switched to	*20
			isn't switched to MIU.	MIU?
Others			Communication between
- Information from the
			the projector and PC is not
projector to PC is not
correct or completed			working well.	Try "MIU RESTART"	*56
- The projector does not			MIU Functions of the	in MIU SERVICE MENU.
respond
			projector is not working
- Image on screen is			well.
freezed
				Check both the PC
				and projector's network
				settings. If you change the
				projector's settings, turn off
		The projector	The PC and/or projector's	the projector's AC power
				and then turn it on again.	8, 10, 16
		that you want	network settings are not	If you simply put the
Wireless / Wired		to connect to	configured correctly.	projector in STANDBY
	Live Mode	is nowhere		power mode and then
		to be found		turn it on again, the new
		on the list		settings might not take
		of available		effect.
		projectors
				• Bring the PC and
				projector closer together
					–
			Weak radio signal	• Radio waves won't go
				through concrete and
				metal (steel doors, etc.)
		Can't	The Projector isn't in Live	Check the mode on MIU
				Menu to make sure that it is	50
		communicate	Mode
				in the correct mode.

80