4. Utilize projector – Advanced -

Date/Time Settings

( 34)

The Date/Time setting can be adjusted via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [http://192.168.1.10] into the address bar of the web browser. Enter the Administrator ID and Password and click [Logon].

2)Click [Date/Time Settings]RQWKHPDLQPHQXDQGFRQ¿JXUHHDFKLWHP

Refer to the [Date/Time Settings] item in >&RQ¿JXULQJDQG&RQWUROOLQJWKH

Projector via a Web Browser] for further information.

3)Click the [Apply] button to save the settings.

NOTE • A Network Restart is required after the Daylight Savings Time or 6173FRQ¿JXUDWLRQVHWWLQJVKDYHEHHQFKDQJHG

The battery for the built in clock may be dead if the clock loses time even when the DATE and TIME have been set correctly. Replace the battery by

following the instructions on replacing the battery.

(User's Manual - Operating Guide : Replacing Internal Clock battery)

The Internal Clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

72

Page 151
Image 151
Hitachi CP-X268AWF user manual Date/Time Settings, Date/Time setting can be adjusted via a web browser