Hitachi CP-X268AWF Schedule Settings, 6FKHGXOHVHWWLQJVFDQEHFRQ¿JXUHGIURPDZHEEURZVHU

4. Utilize projector – Advanced -

Schedule Settings ( 32)

6FKHGXOHVHWWLQJVFDQEHFRQ¿JXUHGIURPDZHEEURZVHU

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [http://192.168.1.10] into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Schedule Settings] on the main menu and select the required schedule item.

4)Click the [Enable] check box to enable scheduling.

(QWHUWKH'DWH0RQWK'D\IRUVSHFL¿FGDWHVFKHGXOLQJ

6)Click [Add] and set the hour, command and parameters and click [Add This Schedule] when you want to add a command.

7)Click the [Delete] button when you want to delete a schedule.

8)Click the [Apply] button to save the settings.

There are three types of scheduling. 'DLO\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWDVSHFL¿HGWLPHHYHU\GD\ 6XQGD\a6DWXUGD\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWWKHVSHFL¿HGWLPHRQD

VSHFL¿HGGD\RIWKHZHHN

6SHFL¿F'DWH3HUIRUPWKHVSHFL¿HGRSHUDWLRQRQWKHVSHFL¿HGGDWHDQGWLPH

NOTE ‡,Q6WDQGE\PRGHWKHSRZHULQGLFDWRUZLOOÀDVKJUHHQIRUDSSUR[ seconds when at least 1 “Power ON” schedule is saved.

•When the schedule function is used, the power cord must be connected to

WKHSURMHFWRUDQGWKHRXWOHWDQGWKHSRZHUVZLWFKPXVWEHWXUQHGRQ>_@7KH schedule function does not work when the power switch is turned off, [{] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power.

73