Hitachi CP-X268AWF user manual Software Installation Procedure

3. How to use Projector software – Basics -

+RZWRXVH³0,8/LYH9LHZHU´&RQWLQXHG

3.1.2. Software Installation Procedure

1)Turn on the PC.

2)Shut down all applications.

3)Insert the accompanying CD-ROM into the PC's CD-ROM drive.

4)After a moment, the Welcome to MIU Utilities Setup dialog will appear as shown on the right. Press Next.

NOTE If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as follows:

(1)Click on the Start button on the toolbar and select Run.

(2)Enter E:\software\setup.exe and then press OK.

If your CD-ROM drive is not drive E on your PC, you will need to replace E with the correct drive letter assigned to your CD-ROM drive.

If software has been already installed, Uninstallation will be done. Click the cancel button, then uninstallation will be canceled. If you uninstalled the software by mis-

RSHUDWLRQSOHDVHUHLQVWDOOWKHVRIWZDUHIURP¿UVWSURFHGXUH

5)The Choose Destination Location dialog appears. Press Next.

NOTE ‡7KH&?3URJUDP)LOHV?0,8B8WLOLW\IROGHUZLOOEHFUHDWHGDQGWKH program will be installed into that folder.

• If you wish to install to a different folder, click Browse and select another folder.

&RQ¿UPWKHSURJUDPIROGHUQDPH

,I0,8B8WLOLW\LVRND\SUHVV1H[WWRFRQWLQXH

If not, enter the desired folder name and then press Next.

45