3. How to use Projector software – Basics -

+RZWRXVH³0,8/LYH9LHZHU´ &RQWLQXHG

[JPEG tab]

Fig. 3.1.3.c “Options”, “JPEG” tab

1)JPEG Quality

When “MIU Live Viewer” is used, it captures PC screen image. Then that is compressed as JPEG and sent to projector. By control bar in this tab, you can set compression rate.

Low (At the far left, Low picture quality): Make JEPG compression rate high. Screen refresh interval becomes shorter due to low volume transferred data, but picture quality decreases.

High (At the far right, High picture quality): Make JEPG compression rate low. Screen refresh interval becomes longer due to high volume transferred data, but picture quality increases.

[Icon in task tray]

To display “MIU Live Viewer” icon in task tray, click “Minimize” button in “MIU Live Viewer” window. The icon with yellow thunder mark shows that communication is connected, and it with red cross mark shows that it is disconnected. (Fig. 3.1.3.d shows while communication is disconnected.)

Fig. 3.1.3.d Icon in task tray

Double click “MIU Live Viewer” icon in task tray to display “MIU Live Viewer” window.

49

Page 128
Image 128
Hitachi CP-X268AWF user manual Jpeg tab, Icon in task tray